Refrigerator service 

 

1. Visual Inspection

• Check for physical damage (dents, cracks, rust)

• Inspect door seals and gaskets for wear or gaps

• Verify unit is level (adjust leveling legs if needed)

 

2. Electrical & Power Check

• Confirm power to the unit (check outlet, plug, and breaker)

• Inspect power cord for damage

• Listen for compressor and fan operation

 

3. Interior Inspection

• Check temperatures in fridge and freezer (thermometer recommended)

• Inspect light bulbs and switches

• Look for frost buildup or blocked air vents

 

4. Condenser Coil Cleaning

• Remove toe kick panel or rear cover

• Use coil brush or vacuum to clean coils

• Check condenser fan (test and clean as needed)

 

5. Evaporator System Check

• Access evaporator panel (if needed)

• Look for ice buildup indicating defrost issues

• Check evaporator fan for operation

 

6. Drain Line & Defrost System

• Inspect and clear defrost drain line

• Test defrost heater, thermostat, and timer/control board

 

7. Ice Maker & Water System

• Check water supply line for kinks or leaks

• Test fill valve and ice maker motor

• Inspect and clean water filter if applicable

 

8. Final Tests

• Run a full cooling cycle check

• Check for proper airflow in both compartments

• Listen for abnormal noises

 

9. Customer Tips (Optional but helpful)

• Show customer how to clean coils quarterly

• Recommend temperature settings (Fridge: 37°F / Freezer: 0°F)